TERRY NO. "0" MIDGET RIGHT ANGLE DRILLING ATTACHMENT

With 10/32" threaded drill spindle
The smallest industrial angle tool known. Engineered particularly for drilling of countersinking inside holes as small as 15/16" in diameter and as close as 7/32" from center to shoulder.

TERRY NO. 1-1 SMALL RIGHT ANGLE DRILLING ATTACHMENT

With 5/16" -- 24 or 1/4" -- 28 threaded spindle
"The small tool with the big thread"
Capacity -- general use -- 1/8" maximum -- 3/16"

TERRY NO. 2 RIGHT ANGLE DRILLING ATTACHMENT

With 3/16"capacity Jacobs Chuck and Key

TERRY NO. 3 RIGHT ANGLE DRILLING ATTACHMENT

With 1/4" -- 28 treaded spindle
This Terry Standard Duty Right Angle is the twin of the No. 2, designed for use with threaded shank drills or with straight drills in Drill Adapters.
Capacity -- general use -- 1/4" maximum -- 5/16"

TERRY NO. 4-1 SMALL ADJUSTABLE OFFSET DRILLING ATTACHMENT

With 1/4" -- 28 or 5/16" -- 24 threaded spindle
Capacity -- 3/16" maximum

TERRY NO. N 51-1 RIGHT ANGLE FLEXIBLE DRILLING ATTACHMENT

With 1/4" -- 28 threaded spindle

TERRY NO. N 63 RIGHT ANGLE FLEXIBLE DRILLING ATTACHMENT

With 1/4" -- 28 or 5/16" -- 24 threaded drill spindle
A combination of the No. 3 Right Angle Head Assembly from the Terry No. 3

TERRY NO. 345 45° ANGLE DRILLING ATTACHMENT

With 10-32 or 1/4" -- 28 threaded drill spindle
The #345 is the twin of the #245, but with an internal threaded spindle.

TERRY NO. N-515 and N-522 LIGHT FLEXIBLE (SNAKE) DRILLING ATTACHMENT

With 1/4" -- 28 OR 5/16" -- 24 threaded drill spindle
The #N-515 and #N-522 are identical except for their length.

TERRY NO. N-6345 and N-522 45° ANGLE FLEXIBLE DRILLING ATTACHMENT